Redland Landmark Double Concrete Pantile


On all orders

Redland Landmark Double Concrete Pantile- Pack of 35


exc VAT


  • Code: 590143
  • Brand: Redland
  • Availability: Call Us

Product Information

Designed to complement the warmth and character of the British built environment, the Landmark Double Pantile offers traditional appeal both in colour and profile, with a rounded leading edge enhancing its classic good looks. The Landmark Double Pantile is offered in two premier plus colours, Terracotta Brindle and Brown Brindle, and a comprehensive range of matching fittings and accessories.

Landmark Double Pantiles are made using Redland's revolutionary manufacturing process, ColourFusion15° and 90°. This involves fusing a very dense layer of highly pigmented amalgam with the top of the tile, so that it actually becomes part of the tile body, rather than a thin, easily eroded layer. This is then cured with a clear protective layer of polymer to give the surface finish and colour maximum longevity.

The ColourFusion15° and 90° process has undergone years of research and testing in the Group's state-of-the-art laboratories and exceeds their exacting standards. Although it is hard to quantify the expected lifetime of any finish since it varies greatly with location, it has been confirmed that tiles created using this new process will retain their intended appearance for much longer in the same environment than the equivalent tile finish produced without the ColourFusion process. A Landmark Double Pantile roof retains its appeal for longer meaning that the benefits of machine-made performance, control and cost have never looked so attractive for so long.

Available Colours:

  • 590143: Terracotta Brindle
  • 590144: Brown Brindle


Landmark Double Pantiles conform to BS EN 490: 2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product Specifications.


Landmark Double Pantiles have been rigorously tested in the Group wind tunnel where combinations of high wind and driving rain are used to determine the tiles performance with respect to wind loading and weathertightness. Tiles will meet the requirements of BS 5534: 2014 Code of practice for slating and tiling (including shingles), providing Redland fixing recommendations are complied with.

Technical Details

Size 418 x 332 mm
Minimum Pitch
& Headlap
at 100 mm headlap
at 75 mm headlap
Maximum Pitch 90° subject to fixing specification
Maximum Headlap 125 mm
Minimum Gauge 293 mm
Maximum Gauge 318 mm
343 mm
below 17.5°
17.5° and over
Tile Thickness 29 mm
Hanging Length 397 mm approx
Linear Cover of 1 Tile 300 mm
Covering Capacity
10.5 tiles/m_
9.7 tiles/m_
at 318 mm gauge
at 343 mm gauge
Laid Weight 51 kg/m_
48 kg/m_
at 318 mm gauge
at 343 mm gauge
Weight per 1000 Tiles 4.90 tonnes approx
Weight per Pallet 1.05 tonnes approx
Battens Required 3.15 m/m_
2.92 m/m_
at 318 mm gauge
at 343 mm gauge
Batten Size 38 x 25 mm
50 x 25 mm
rafter centres up to 450 mm
rafter centres up to 600 mm
Nail Size 70 x 3.75 mm
Tiles per Pallet 210
Tiles per Pack 35
Packs per Pallet 6


  • Landmark Double Pantiles must be laid straight bonded, normally from right to left
  • Reform Eaves Filler Units must be used at all eaves situations.
  • At left-hand verges, use Standard Tiles with interlocks removed. At right-hand verges, use Standard Tiles. Half Tiles must not be used at verges.
  • Dentil slips must be used for mortar bedded ridges and hips.
  • Half Tiles should be used to avoid the use of small pieces of tiles.

Product Data Sheet