Redland's range of concrete plain tiles are quick and easy to lay and offer great versatility and scope for varied effects.
The tile features a double camber from side to side as well as from head to tail which textures the roof adding rich detail to a building.
Tiles are available in a wide range of different surface finishes, including smooth, sanded, painted and granular to blend with traditional roofing materials throughout the country.
- 615102: Brown
- 615103: Antique Red
- 615112: Cotswold
- 615118: Hedgerow Brown
- 615127: Natural Red
- 615130: Slate Grey
- 615134: Terracotta
- 615136: Tudor Brown
- 615139: Farmhouse Red
- 615152: Breckland Brown
- 615163: Black
- 615177: Charcoal Grey
- 615178: Rustic Red
Concrete Plain Tiles conform to BS EN 490: 2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product Specifications.
Concrete Plain Tiles have been rigorously tested in the Group wind tunnel where combinations of high wind and driving rain are used to determine the tile performance with respect to wind loading and weathertightness. Tiles will meet all the requirements of BS 5534: 2014 Code of practice for slating and tiling (including shingles), providing Redland fixing recommendations are complied with.
|Size||268 x 165 mm|
|Maximum Pitch||90°||subject to fixing specification|
|Minimum Headlap||65 mm
|Maximum Headlap||88 mm|
|Minimum Gauge||88 mm|
|Maximum Gauge||100 mm
|Tile Thickness||13 mm|
|Hanging Length||248 mm||approx|
|Linear Cover of 1 Tile||165 mm|
|Laid Weight||75 kg/m2
|Weight per 1000 Tiles||1.25 tonnes||approx|
|Weight per Pallet||1.01 tonnes||approx|
|Battens Required||10 m/m2
|Batten Size||38 x 25 mm||rafter centres up to 600 mm|
|Nail Size||40 x 2.65 mm|
|Tiles per Pallet||768|
|Tiles per Pack||16|
|Packs per Pallet||48|
- Tiles are stacked by wedging a tile vertically behind a batten to create a platform for a stack of tiles
- Tiles must be laid broken bond in a half bond pattern, but the side lap may be reduced to a minimum of a third of the width of the tile (55 mm) in some circumstances, e.g. curved roofing
- Tiles must be hung on their nibs
- Adjacent tiles should be laid with a nominal gap of 1.5 mm, maximum 3 mm
- At eaves, use double courses with purpose made Eaves/Top Tiles for the undercourse.
- At verges and abutments, use Standard Plain Tiles and Tile-and-a-Halves in alternate courses.
- Adjacent to hips and valleys, use Tile-and-a-Halves for raking cuts.
- At side abutments, allow for stepped flashing and soakers.
- At top courses use double courses with purpose made Eaves/Top Tiles for the top course.
- For Winchester Cuts use two Tile-and-a-Halves per course. This detail must not be used to abut roof pitches below 40°or in exposed locations. In these cases, use soldier or double soldier courses.
- Individual tiles can be laid unfixed or nailed
- Always refer to FixMaster for a BS 5534-compliant fixing specification
- When nailing, two nails must be used per tile
- With mortar bedded ridges and top edge abutments, since the Eaves/Top Tiles hang on the top course of tiles they are fixed to the tile below with Top Tile Clips