Redland Rosemary Classic Clay Tile

NATIONWIDE DELIVERY

On all orders

Redland Rosemary Classic Clay Tile - Pack of 14

£5.28

exc VAT

ADDITIONAL INFORMATION

  • Code: 650180
  • Brand: Redland
  • Availability: Call Us

Product Information

The Rosemary name is synonymous with clay plain tiles, adding distinction and character to pitched roofs for over 175 years. Today, a range of single and cross-camber tiles combine the quality of hand-crafted clay with the reliability of modern machine-made techniques. Produced from the finest clays, Rosemary is offered in a range of weathered, brindled and single colours that create striking and attractive roofs.

Available Colours:

  • 650180: Red
  • 660183: Heather Brindle
  • 660191: Burnt Blend
  • 660195: Dark Antique
  • 670194: Russet Mix
  • 680181: Light Mixed Brindle
  • 680182: Medium Mixed Brindle
  • 680187: Blue Brindle

Authority

For full details of the standards to which Rosemary tiles are produced, please view the Rosemary Product Standard PDF document. This document provides details including testing, dimensional tolerances, shape, strength and permissible superficial surface faults.

Rosemary Clay Classic Plain Tiles conform to BS EN 1304: 2013 Clay roofing tiles and fittings - Product definitions and specifications.

Performance

Rosemary Clay Classic Plain Tiles have been rigorously tested in the Group wind tunnel where combinations of high wind and driving rain are used to determine the tile performance with respect to wind loading and weathertightness. Tiles will meet all the requirements of BS 5534: 2014 Code of practice for slating and tiling (including shingles), providing Redland fixing recommendations are complied with.

Technical Details

Size 265 x 165 mm
Minimum Pitch 35̴åÁ
Maximum Pitch 90̴åÁ subject to fixing specification
Minimum Headlap 65 mm
35 mm
below 90̴åÁ
at 90̴åÁ
Maximum Headlap 88 mm
Minimum Gauge 88 mm
Maximum Gauge 100 mm
115 mm
below 90̴åÁ
at 90̴åÁ
Tile Thickness 12 mm
Hanging Length 254 mm approx
Linear Cover of 1 Tile 165 mm
Covering Capacity
(net)
60 tiles/m̴_
52 tiles/m̴_
below 90̴åÁ
at 90̴åÁ
Laid Weight (Below 90̴åÁ) 77 kg/m̴_
Laid Weight (At 90̴åÁ) 67 kg/m̴_
Weight per 1000 Tiles 1.29 tonnes
Weight per Pallet 1.1 tonnes
Battens Required 10 m/m̴_
8.7 m/m̴_
below 90̴åÁ
at 90̴åÁ
Batten Size 38 x 25 mm rafter centres up to 600 mm
Nail Size 40 x 2.65 mm
Tiles per Pallet 840
Tiles per Pack 14
Packs per Pallet 60

Laying

  • Tiles are stacked by wedging a tile vertically behind a batten to create a platform for a stack of tiles
  • Tiles must be laid broken bond in a half bond pattern, but the side lap may be reduced to a minimum of a third of the width of the tile (55 mm) in some circumstances, e.g. curved roofing
  • Tiles must be hung on their nibs
  • Adjacent tiles should be laid with a nominal gap of 1.5 mm, maximum 3 mm
  • At eaves, use double courses with purpose made Eaves/Top Tiles for the undercourse
  • At verges and abutments, use Standard Plain Tiles and Tile-and-a-Halves in alternate courses
  • Adjacent to hips and valleys, use Tile-and-a-Halves for raking cuts
  • At side abutments, allow for stepped flashing and soakers
  • At top courses use double courses with purpose made Eaves/Top Tiles for the top course.
  • For Winchester Cuts use two Tile-and-a-Halves per course. This detail must not be used to abut roof pitches below 40̴åÁ or in exposed locations. In these cases, use soldier or double soldier courses
  • Individual tiles can be laid unfixed or nailed
  • Always refer to FixMaster for a BS 5534-compliant fixing specification
  • When nailing, two nails must be used per tile

Product Data Sheet