Rubberseal EPDM Bonding Adhesive is a solvent-based contact adhesive designed specifically for bonding EPDM membranes and flashings to insulations, wood, metal, masonry, and other acceptable substrates.
Method of Application
1. Surfaces to receive EPDM Bonding Adhesive shall be clean, smooth, dry, free of sharp edges, loose and foreign materials, oil, grease, and other contaminants. Sweep the mating surface of the membrane with a stiff broom to remove excess dusting agent, if present, or other contaminants from the mating surface.
2. Stir the adhesive thoroughly before and during use, achieving a uniform mix with no sediment on the bottom and no marbling evident. Stir the adhesive thoroughly before and during use, achieving a uniform mix with no sediment on the bottom and no marbling evident.
3. Apply adhesive at about the same time to both the exposed underside of the sheet and the substrate to allow approximately the same flash-off time.
4. EPDM Bonding Adhesive may be applied with a solvent-resistant paint roller or mechanical equipment designed to apply flammable solvent-based adhesives.
5. Apply by rolling the adhesive on both mating surfaces. EPDM Bonding Adhesive should be applied evenly to avoid globs or puddles.
6. As an option, spray EPDM Bonding Adhesive and back-roll the adhesive uniformly and evenly with a solvent-resistant paint roller. Care must be taken not to apply EPDM Bonding Adhesive over any area that will later be cleaned and spliced to another sheet or flashing.
7. Allow EPDM Bonding Adhesive to flash off until tacky. Touch the EPDM Bonding Adhesive surface with a clean, dry finger to be certain that the adhesive is dry and does not stick or string. While pushing straight down to check for stringing, also push forward on the adhesive at an angle to ensure that the adhesive is ready (flashed off) throughout its thickness. If either motion exposes wet or stringy adhesive when the finger is lifted, then it is not ready for mating. Flash-off time will vary depending on ambient air conditions.
8. Starting at the fold, roll the previously coated portion of the sheet into the coated substrate slowly and evenly to maintain position and minimize wrinkles.
9. To ensure proper contact, compress the bonded half of the sheet to the substrate with a stiff push broom using heavy pressure.
Coverage:
750ml Spray – 1.3 sq/m
2.5L - 7.5 sq/m
5L - 15 sq/m
10L - 30 sq/m
The Bonding Adhesive is available in three different sizes: 750ml, 2.5L, 5L and 10L.
Delivery
How much does delivery cost?
Delivery charges will vary and will depend on the manufacturer, weight, size and delivery location. The cost is automatically calculated when you add items to the shopping basket.
How long will I wait for my delivery?
The estimated delivery times are shown on each product page, we will email you each step of the way to keep you informed. The majority of products can be delivered within 3-5 working days.We will advise you if the delivery period is different from than stated on our website.
Do you offer NEXT DAY delivery?
We currently offer next day delivery on certain brands. If you have a particular item that you require quicker than the guide on our website, please contact our sales team on 01858 455055 during office hours, they will be able to confirm whether a quicker delivery is possible.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
Do you offer FREE Delivery if I spend a substantial amount?
Not as standard, we show the delivery charges separate once you go to the checkout so it is clear what you are paying for the products and delivery costs. If you are ordering larger quantities please contact out sales team who will be able to confirm if this is possible.
Do you deliver on Weekends?
Not as standard, our deliveries are made Monday to Friday. If you do need an urgent Saturday delivery please contact out sales team on 01858 455055 during office hours who will be able to confirm. This will incur a premium charge if possible.
Do you deliver to Northern Ireland/Guernsey/The Scottish Highlands/Isle of Wight?
Yes, we do but our transport charges incorporated in the site do not cover these areas, please contact our sales team on 01858 455055 during office hours for costs; or we will contact you to make the additional payment once you have completed your online purchase.
What if my delivery doesn't turn up on time?
Please contact our sales office on 01858 455055 or email sales@roofgiant.com and we will advise on the status of your order.
REFUND POLICY
Returns
Important Note: Please do not send goods back to Roof Giant before speaking to the Roof Giant sales office.
Roof Giant strongly recommend you take photographs of goods before returning. Occasionally goods are damaged during transit, therefore you may need to confirm the packaging/goods were intact (prior to collection) to the courier as part of the refund process.
As a consumer you have the right to change your mind (Consumer Regulations 2013). This right stipulates that for most products purchased online you have a legal right to change your mind within 14 days and receive a refund under the consumer contracts regulations 2013.
This right starts from the point you or someone you nominate receives the goods. If your goods are being delivered in multiple deliveries your right starts from the point the last delivery is received.
If you wish to exercise this right you must in the first instance contact us via phone 01858 455055 or email sales@roofgiant.com advising us of your wish to change your mind, its then your responsibility to arrange for the goods to be returned to us within 14 days of ending the contract.
For more information on our full returns policy, click here.
